New Holland and Codemo Machinery offer a full range of Precision Land Management (PLM) solutions that can be tailored to suit an individual’s needs.  


PLM software analyses and strategises your in-field tasks so you can benefit from more effective farming. Our goal is to reduce inputs, save you money, and improve yields while benefiting the environment. Less inputs means reduced wastage, and more efficient coverage of your land means higher profits.


Speak with our dedicated team to receive industry leading information about how you can increase your accuracy and reliability using Precision Land Management auto guidance solutions.



The IntelliView III colour touchscreen monitor is your partner in all farming operations and is available on the T6 Auto Command and T7. The T8 and T9 tractor ranges, CR combines harvester range along with the BigBaler & Speedrower® Self-propelled Windrower ranges are fitted standard with the new widescreen IntelliView IV colour touchscreen monitor.




The FM-750 is a multi-function display, and has a built-in receiver that allows you to choose the accuracy your application requires from +/-20cm to +/-2.5cm pass-to-pass and year-on-year. When you need a DGPS guidance system that saves you time, fuel and inputs, look no further than the FM-750.



The IntelliView IV can be used as a second screen for precision farming applications on T7, T8 and T9 tractor ranges and CR combine harvesters. Both the IntelliView III and IntelliView IV displays communicate directly with the IntelliSteer™ system together with the machine’s CAN Bus, and display key operating parameters in real time on just one screen. Maximum operator comfort is guaranteed thanks to the intuitive operating logic which enables you to see just where you are, and enables you to select the precise information you wish to browse, monitor and control.




The FM-1000 offers you ultimate performance and reliability with the industry leading dual integrated GPS and GLONASS receivers. It handles the full range of guidance tasks with ease, including steering and also offers fingertip mapping control. You can even choose the level of accuracy required, from 20cm right down to 2.5cm pass-to-pass and from 20cm right down to 2.5cm pass-to-pass and year-to-year. 
PLM Water Management compatible



The EZ-Guide® 250 is an easy to use and affordable tool that offers up to +/-45cm pass-to-pass accuracy. The built in OnPath® filter technology provides improved pass-to-pass accuracy and the EZ-Guide® 250 is compatible with all makes and models of equipment.




The ultra-wide screen XCN-2050™ display is compatible with the full range of correction signals and offers intuitive, colour multi-touchscreen operation. It has been designed to ensure full integration with advanced PLM™ technology including yield and moisture sensing, as well as a whole range of other precision guidance applications.



Using data from the GPS receiver, the EZ-Pilot controller sends precise instructions to the steering wheel motor. T3™ Terrain Compensation technology continually corrects for roll, pitch and yaw by using threeaxis solid state inertial sensors to give you a true on-ground position.


The T6 Auto Command, T7, T8 and T9 ranges, CR combine series and Speedrower® Self-propelled Windrowers are all supplied with the IntelliSteer™ ready package. You can order your machine IntelliSteer™ complete as a factory installed option or have these kits fitted as a Dealer Installed Accessory. The IntelliSteer™ ready system includes steering angle sensor or a solid state gyro, a hyraulic control valve which converts the signals from the Navigation Controller II into hydraulic movements of the steering system. The IntelliSteer™ complete package adds a NH 372 Receiver, the Navigation Controller II to complete your guidance package.



EZ-Steer is a simple portable hands-free steering system for all vehicle models, old and new. The EZ-Steer system turns the steering wheel for you by combining a friction wheel and a drive motor, which is commanded indirectly by an output from the guidance display. EZ-Steer keeps you on line in undulating terrain and when working on terraces, it also helps you avoid ditches and waterways so that you can focus on the task in hand, be that spraying or planting. Put simply, it improves performance, quality and crop yields all whilst reducing stress.


The Autopilot™ automated steering system, when used with an RTK signal, will give +/-2.5cm repeatability in all field tasks, from planting to harvesting and following any in-field pattern. The Autopilot™ system can be integrated into most brands of tractor and harvesting machinery, and it uses the machine’s electro hydraulic circuit to provide automatic guidance. This retrofit solution will significantly increase your efficiency during field preparation, planting and harvesting as you’ll be able to drive more accurately and consistently during extended periods behind the wheel


The T2™ Terrain Compensation system uses sensors to calculate and correct the roll and yaw of the machine to help minimise skips and overlaps in areas with rolling terrain and rough ground.



The Field-IQ crop input control system is a variable rate and section control system that runs on FM-750 or FM-1000 monitors. It prevents seed and fertiliser overlap, controls the rate of material application and monitors seed delivery. Field-IQ™ automatic section control is able to control up to 48 individual rows, eliminating waste and double application of inputs by automatically shutting off rows or sections in areas which have already been covered, or do not require application.

Inquire Now
Connect with our Sales Team

Thanks for submitting!